A clogged kitchen sink can be a nightmare. You can’t clean dishes or do anything else when the water won’t drain. It can even be dangerous. So, how can you prevent a clogged kitchen?
A simple and inexpensive way to prevent a clogged kitchen is to keep the waste that goes down your drains as clean as possible. That means avoiding putting too much grease down the drain, and keeping food scraps away from the disposal.
It also means keeping large particles out of the pipes and into a trash can rather than in the sink. This can include cooking fats, coffee grounds, excessive soap scum and other waste that can easily build up in your pipes over time.
You can use a drain screen to catch large particles before they go down the drain. These screens are inexpensive and easy to install, and can help to stop a lot of clogs before they get started.
Another great option is to use a drain trap. These traps are usually plastic and designed to fit over the bottom of your sink’s drain grate. The trap will block non-liquid materials from flowing down the drain, preventing clogs and allowing liquids to pass through easily.
Using a drain trap can reduce the risk of clogged sink in Long Beach. They are inexpensive and can be purchased at any hardware or home improvement store.
Some traps can also be used for garbage disposer drains. You’ll need to clean the trap after every use of the disposer, and you’ll want to remove any large items from the disposer, including turkey carcasses, gummy foods or fibrous peels that may have built up in the disposal.
It’s also a good idea to check the disposal for obstructions when you notice a clog, as these can be difficult to unclog on your own. If you see a large piece of debris in the disposal, it’s likely a clog that requires professional repair.
You can also try a plumbing snake (also known as an auger). These thin cables can be easily inserted into your kitchen sink’s pipe and extended into the drain to break up a clog.
If you’re using a plumbing snake, it’s best to wear gloves while you work. The tool isn’t meant to be pushed down too far, so it can damage the pipe if you apply too much pressure.
Alternatively, you can use a wire coat hanger to try to pull up a clog. However, it won’t reach as far into your plumbing as a plumber’s snake will, and you may find that the clog is deeper than you expected.
You can also pour baking soda down the drain and let it sit for a while before flushing it with hot water. This will clear the drain and keep it smelling fresh, but it won’t have a 100% success rate. You may need to repeat this process multiple times to unclog a kitchen sink.