PlumberlandLA

Call today

+1 (747) 245 1788

Call today

+1 (747) 245 1789

A clogged toilet can be an embarrassing situation for many homeowners. The most obvious solution is to call a plumber and have him unclog the pipe, but sometimes you can handle the situation yourself.

If you have a plunger handy, you can try plunging the toilet by filling the bowl with water and pushing the plunger down on the drain. Make sure you use a durable rubber plunger with a flange (one that looks like a ball) so it seals tightly around the clog.

Plunge slowly at first, and be careful not to pull the plunger up too fast, which can break the flange or cause the clog to re-stick. Continue a few dozen plunge cycles until you start to see the water draining.

Then, pump the plunger vigorously several times. This may take a few attempts, but it will likely work eventually.

Another technique that can break up a clog is to pour hot water into the bowl. But be careful to keep the water hot, not boiling. Boiling water can crack porcelain and cause your toilet to stop working.

Baking soda and vinegar can also break up a clog without you having to touch it. This is the same stuff that was used to make your volcano back in third grade.

When you combine baking soda with vinegar, the combination creates a powerful fizzing action that can easily break apart any debris in the drain. Check the toilet regularly after a few minutes to see if it’s working.

If the clog isn’t releasing by itself, add some dish soap to the toilet to coat the clog and help it slide down the drain. You can also add some hot tap water to help it soften and break up the clog.

A wet-dry vacuum can also be a great tool for getting rid of a clogged toilet in Long Beach. It has special tools for this job, and you can rent one at most hardware stores.

Once the clog is gone, you can flush it a few times to remove any remaining residue. Be sure to wear gloves to protect yourself from any potential damage.

You can also place a sheet of plastic wrap on top of the toilet seat to create a vacuum that can loosen clogs. This is a little more unconventional than plungers or drain snakes, but it can often work.

If you don’t have a plunger, you can always try using a large plastic bottle with hot water in it. Simply fit the end of the bottle into the outlet at the bottom of the toilet, and squeeze it until it shoots out water.

To ensure the water doesn’t splash, be sure to wear a mask and eye protection. This is a relatively safe and inexpensive option for dealing with a clogged toilet, but you’ll want to be patient and watch the water level in the toilet bowl as you do it.

The best way to get rid of a clogged toilet is to understand what’s causing it and fix the problem as quickly as possible. Typically, most clogs are caused by things that shouldn’t be flushed into the plumbing system. This includes toilet paper, baby wipes, feminine hygiene products, hair, and other waste. But if something else is causing the clog, it will probably need to be removed with a drain snake or other invasive method.

What To Do In Cas Of A Clogged Toilet in Long Beach?

CALL US NOW!